{"items":[{"highlight":{"whois.related_nets.contacts.emails":"sweetwater@hsihotels.com"},"data":{"ip":"12.148.110.2","isp":"AT&T Services","uri":"http://12.148.110.2:80/","host_type":"ip","prot7":"http","target":{"ip":"12.148.110.2","type":"ip"},"geo":{"continent":"North America","country":"US","city":"Emporia","tz":"America/Chicago","accuracy":200,"location":{"lon":-96.1844,"lat":38.4186},"postal":"66801","registered_country":"US","subdivisions":["Kansas"]},"path":"/","protocol":"http","prot4":"tcp","@timestamp":"2026-08-08T17:06:49.810Z","whois":{"abuse":"abuse@att.net","related_nets":[{"country":"US","address":"3007 W 18 AV","city":"EMPORIA","created":"2015-09-25","description":"IHGCO ATT","handle":"NET-12-148-110-0-1","organization":"IHGCO ATT (IA-417)","start_ip":"12.148.110.0","name":"IHGCO-AT22-110-0","cidr":["12.148.110.0/29"],"net_size":7,"state":"KS","postal_code":"66801","updated":"2015-09-25","end_ip":"12.148.110.7","contacts":{"emails":["sweetwater@hsihotels.com"],"phones":["+1-325-235-3500"]}}],"net":{"country":"US","address":"208 S. Akard St.","city":"Dallas","created":"1983-08-23","description":"AT&T Enterprises, LLC","range":"12.0.0.0 - 12.255.255.255","handle":"NET-12-0-0-0-1","organization":"AT&T Enterprises, LLC (AEL-360)","start_ip":"12.0.0.0","name":"ATT","cidr":["12.0.0.0/8"],"net_size":16777215,"state":"TX","postal_code":"75202","updated":"2025-12-02","end_ip":"12.255.255.255","contacts":{"emails":["abuse@att.net","routing_poc@att.com","rm-ipspecialist@att.com","ipadmin@att.com"],"phones":["+1-919-319-8167","+1-999-999-9999","+1-888-876-2382","+1-888-510-5545"]}},"asn":{"registry":"arin","country":"US","number":["7018"],"name":"ATT-INTERNET4 - AT&T Enterprises","cidr":"12.128.0.0/9","updated":"1983-08-23"}},"port":80,"host":"12.148.110.2","http":{"headers":{"server":["lighttpd/1.4.39"],"accept_ranges":["bytes"],"content_type":["text/html"],"cache_control":["no-store, no-cache, must-revalidate, post-check=0, pre-check=0"],"last_modified":["Fri, 18 Jun 2021 00:44:19 GMT"],"content_length":["52612"],"x_frame_options":["deny"]},"status_code":200,"body_sha256":"8e694686aacb3394edcd6acd051fd19b71919261c8bc2dd36af6c41fcfac1304","meta":["charset=\"utf-8\"","http-equiv=\"X-UA-Compatible\" content=\"IE=edge,chrome=1\"","name=\"description\" content=\"\"","name=\"viewport\" content=\"width=device-width\""],"body":"\n\n\n\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n

\n \n

Healthy

This is functioning normally

\n \n

Something's not right

\n This is trying to join a network or find a working ethernet connection.\n

\n This has detected an IP conflict on its uplink connection with another machine.\n

\n This is not connected to the Internet.\n

\n This does not have a working DNS server.\n

\n This is not connected to the Cisco Meraki cloud.\n

\n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n

\n \n

Site Survey

This is in site survey mode. You can disable site survey mode on the Configure tab.

Connection
Neighbors
Configure
Ethernet
Switch ports status
Switch ports configuration

Your client connection

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Client IP
Client MAC
VLAN
Port
AP radio
Channel
Mode
Max bitrate
Signal	\n \n \n \n

Speed test

Run a browser-based speed test to check your connection to this .

Run speed test

details

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Name
Network name
Hardware address
Product model
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
Ethernet	\n \n This is directly connected to a local network.\n Primary IP address: \n \n \n Primary IP address: \n This is acting as a repeater and has not detected a uplink connection on an Ethernet port.\n \n \n This is trying to join a network or find a working Ethernet connection.\n \n \n Primary IP address: \n This has detected an IP conflict on its uplink connection with another machine.\n \n \n
Internet	\n \n This is connected to the Internet.\n \n \n This is not connected to the Internet.\n \n \n This does not have a working DNS server.\n \n
Cisco Meraki cloud	\n \n This is not connected to the Cisco Meraki cloud.\n \n \n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n \n \n This is successfully connected to the Cisco Meraki cloud.\n \n
Firmware	\n \n

Cellular status

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Status
IP
Type
Provider
Model
Access Point Name (APN)
Signal strength
Reference Signal Received Power (RSRP)
Reference Signal Received Quality (RSRQ)
Band

Stacking Status

\n \n \n \n \n \n \n \n \n \n

Hardware Addresss	Product Model	Current

\n
\n
Meraki peers
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n
Neighbors
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n\n
\n\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n
\n
Internet 1
\n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IP assignment\n \n
- \n Address\n \n
\n\n
\n\n
\n
Internet 2
\n\n\n
- \n Role\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection Type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IP assignment\n \n
- \n Address\n \n
\n\n
\n\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n \n
\n
IP configuration
\n
- \n IP assignment\n \n
- \n VLAN\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
\n
\n\n
\n
Site survey
\n
In site survey mode, the AP will always broadcast the open SSID site_survey-<MAC address> and will not check for connectivity with the Cisco Meraki cloud.\n This mode should only be used to perform a site survey, not for serving wireless clients.
\n
- \n Survey mode?\n \n
\n
\n
\n
\n\n
\n
\n
Web proxy
\n
HTTP will be used for the device to communicate with the Cisco Meraki cloud if UDP communication is blocked
\n
- \n Use a proxy?\n \n
- \n Hostname or IP\n \n
- \n Port\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
\n
\n
\n Save\n
\n \n
\n\n
\n\n
\n
\n
Download support data
\n
Download diagnostic information about this device for Support to examine. This can take several minutes.
\n
Do this only if requested by Cisco Meraki Support.
\n \n \n
\n
\n
\n
\n
Ethernet configuration
\n
Use this page to configure physical link settings on the Ethernet ports.
\n
\n
\n
\n Save\n
\n \n
\n
\n
\n
\n
Switch ports status
\n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Native VLAN Allowed VLANs Flags Status Bytes in Bytes out
\n
\n
\n
\n
\n
Switch ports configuration
\n
\n
\n\n
Invalid VLAN number. VLAN must be a value between 1 and 4094, or \"none\" for trunk ports
\n
Invalid Stackport configuration. No more than 2 stackports are supported
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Port Name Enabled Stacking Port Schedule Access Policy Native VLAN Allowed VLANs Link Negotiation
\n
\n
\n Save\n
\n or cancel\n \n
\n
\n
\n
\n
Incorrect password
\n
You've entered incorrect login credentials. The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password. The serial number is on the bottom or back of the device.
\n \n
\n Try again\n
\n
\n

\n \n

\n\n \n \n \n \n \n \n \n\n","title":"","status_line":"200 OK","version":"1.1","content_length":52612},"tag":[{"spin_js":{"version":""},"name":"spin_js","description":"Configurable JavaScript/CSS spinner that can be used as a resolution-independent loading indicator","fullname":"spin.js","category":["JavaScript graphics"]},{"name":"bootstrap","description":"Bootstrap is a free and open-source CSS framework directed at responsive, mobile-first front-end web development. It contains CSS and JavaScript-based design templates for typography, forms, buttons, navigation, and other interface components.","cpe":["cpe:2.3:a:getbootstrap:bootstrap:*:*:*:*:*:*:*:*"],"bootstrap":{"version":""},"fullname":"Bootstrap","category":["UI frameworks"]},{"lighttpd":{"version":"1.4.39"},"name":"lighttpd","description":"Lighttpd is an open-source web server optimised for speed-critical environment.","fullname":"lighttpd","category":["Web servers"]},{"name":"modernizr","description":"Modernizr is a JavaScript library that detects the features available in a user's browser.","modernizr":{"version":""},"fullname":"Modernizr","category":["JavaScript libraries"]},{"name":"jquery","description":"jQuery is a JavaScript library which is a free, open-source software designed to simplify HTML DOM tree traversal and manipulation, as well as event handling, CSS animation, and Ajax.","cpe":["cpe:2.3:a:jquery:jquery:3.5.0:*:*:*:*:*:*:*"],"fullname":"jQuery","category":["JavaScript libraries"],"jquery":{"version":"3.5.0"}}],"scan_date":"2026-08-07"},"scan_label":"2026-08-07"},{"highlight":{"whois.related_nets.contacts.emails":"sweetwater@hsihotels.com"},"data":{"ip":"12.16.218.36","isp":"AT&T Services","uri":"http://12.16.218.36:80/","host_type":"ip","target":{"ip":"12.16.218.36","type":"ip"},"prot7":"http","geo":{"continent":"North America","country":"US","city":"Downers Grove","tz":"America/Chicago","accuracy":500,"location":{"lon":-88.0066,"lat":41.7996},"postal":"60515","registered_country":"US","subdivisions":["Illinois"]},"path":"/","prot4":"tcp","protocol":"http","@timestamp":"2026-08-08T13:42:06.770Z","whois":{"abuse":"abuse@att.net","related_nets":[{"country":"US","address":"2600 LAKE COOK RD","city":"RIVRWDS","created":"2015-09-26","description":"IHGCO ATT","handle":"NET-12-16-218-32-1","organization":"IHGCO ATT (IA-425)","start_ip":"12.16.218.32","name":"IHGCO-AT33-218-32","net_size":7,"cidr":["12.16.218.32/29"],"state":"IL","postal_code":"60015","updated":"2015-09-26","end_ip":"12.16.218.39","contacts":{"emails":["sweetwater@hsihotels.com"],"phones":["+1-325-235-3500"]}}],"net":{"country":"US","address":"208 S. Akard St.","city":"Dallas","created":"1983-08-23","description":"AT&T Enterprises, LLC","range":"12.0.0.0 - 12.255.255.255","handle":"NET-12-0-0-0-1","organization":"AT&T Enterprises, LLC (AEL-360)","start_ip":"12.0.0.0","name":"ATT","net_size":16777215,"cidr":["12.0.0.0/8"],"state":"TX","postal_code":"75202","updated":"2025-12-02","end_ip":"12.255.255.255","contacts":{"emails":["abuse@att.net","routing_poc@att.com","rm-ipspecialist@att.com","ipadmin@semail.att.com"],"phones":["+1-919-319-8167","+1-999-999-9999","+1-888-876-2382","+1-888-510-5545"]}},"asn":{"registry":"arin","number":["7018"],"country":"US","name":"ATT-INTERNET4 - AT&T Enterprises","cidr":"12.0.0.0/9","updated":"1983-08-23"}},"port":80,"host":"12.16.218.36","http":{"headers":{"accept_ranges":["bytes"],"content_type":["text/html"],"cache_control":["no-store, no-cache, must-revalidate, post-check=0, pre-check=0"],"last_modified":["Wed, 27 Mar 2024 14:39:36 GMT"],"content_length":["79963"],"x_frame_options":["deny"]},"status_code":200,"body_sha256":"14c77a6811451e56f901504e133db9992dced76c59dd2d070f16b428a7d25644","meta":["charset=\"utf-8\"","http-equiv=\"X-UA-Compatible\" content=\"IE=edge,chrome=1\"","name=\"description\" content=\"\"","name=\"viewport\" content=\"width=device-width\""],"status_line":"200 OK","title":"","body":"\n\n\n\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n

\n \n

Healthy

This is functioning normally

\n \n

Something's not right

\n This is trying to join a network or find a working ethernet connection.\n

\n This has detected an IP conflict on its uplink connection with another machine.\n

\n This is not connected to the Internet.\n

\n This does not have a working DNS server.\n

\n This is not connected to the .\n

\n This is not connected to the Internet.
This could be due to poor signal conditions.\n

\n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n

\n Device is in Safe Mode! \n

\n \n

Site Survey

This is in site survey mode. You can disable site survey mode on the Configure tab.

Connection
Neighbors
Configure
Ethernet
Switch ports status
Switch ports configuration
Cellular Status

Your client connection

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Client IP
Client MAC
VLAN
Port
AP radio
Band
Channel
Mode
Max bitrate
Signal	\n \n \n \n

Speed test

Run a browser-based speed test to check your connection to this .

Run speed test

details

\n \n \n \n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n \n \n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Name
Network name
Hardware address
Product model
Signal Strength	\n \n \n \n
Reference Signal Received Power (RSRP)	\n \n \n \n
Reference Signal Received Quality (RSRQ)	\n \n \n \n
Received Signal Code Power (RSCP)	\n \n \n \n
Energy per chip over Noise Spectral Density (EC/N0)	\n \n \n \n
Band
Type
Carrier
APN
Status
Connection
Error Message
IP Type
Platform
Open Source Disclosure	Download
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
Cellular Uplink	\n \n This is connected to a cellular network.\n Cellular IP address: \n Cellular IPv6 address: \n \n
Ethernet	\n \n This is directly connected to a local network.\n Primary IP address: \n Primary IPv6 address: \n \n \n Primary IP address: \n Primary IPv6 address: \n This is acting as a repeater and has not detected a uplink connection on an Ethernet port.\n \n \n This is trying to join a network or find a working Ethernet connection.\n \n \n Primary IP address: \n Primary IPv6 address: \n This has detected an IP conflict on its uplink connection with another machine.\n \n \n
Internet	\n \n This is connected to the Internet.\n \n \n This is not connected to the Internet.\n \n \n This does not have a working DNS server.\n \n
	\n \n This is not connected to the .\n \n \n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n \n \n This is successfully connected to the .\n \n
Firmware	\n \n

Cellular Status

VLAN utilization

\n \n \n \n \n \n \n \n \n \n \n \n

	VLAN list	VLAN count
Port primary or allowed VLANs
Access port voice VLANs
Access policy guest VLANs
Management VLAN
All VLANs in use

Cellular status

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Status
IP
Type
Provider
Model
Access Point Name (APN)
Signal strength
Reference Signal Received Power (RSRP)
Reference Signal Received Quality (RSRQ)
Band

Stacking Status

\n \n \n \n \n \n \n \n \n \n

Hardware Addresss	Product Model	Current

\n
\n
Meraki peers
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n
Neighbors
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n\n
\n\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n
\n
Internet 1
\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n\n
\n\n
\n
Internet 2
\n\n\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection Type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n
\n\n
\n\n
\n
\n\n
\n
Safe Mode
\n
In Safe Mode Port 1 Is Configured as a WAN Port. This allows the \n Port 1 to be plugged into a switch,router and other uplink to access Meraki Cloud\n even when the cellular network is inaccessible.
\n
\n
Internet 1
\n
- \n Enable Safe Mode\n \n
\n
\n
\n
\n
SIM PIN
\n
\n
- \n PIN\n \n
- \n Number of PIN attempts remaining\n \n
\n
\n
\n
\n
Cellular Information
\n
SIM specific information.
\n
\n
- \n IMEI\n \n
- \n ICCID\n \n
- \n IMSI\n \n
\n
\n
\n
\n
Access Point Name Configuration
\n
Set Cellular Override in order to set APN and other cellular settings.
\n
\n
- \n Cellular Override\n \n
- \n APN\n \n
- \n Username\n \n
- \n Password\n \n
- \n Cellular Authorization\n \n
- \n Cellular IP Type\n \n
- \n PUK\n \n
\n
\n
\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n \n
\n
IP configuration
\n
- \n IP assignment\n \n
- \n VLAN\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
\n
\n\n
\n
Site survey
\n
In site survey mode, the AP will always broadcast the open SSID site_survey-<MAC address> and will not check for connectivity with the .\n This mode should only be used to perform a site survey, not for serving wireless clients.
\n
- \n Survey mode?\n \n
\n
\n
\n
\n\n
\n
\n
Web proxy
\n
HTTP will be used for the device to communicate with the if UDP communication is blocked
\n
- \n Use a proxy?\n \n
- \n Hostname or IP\n \n
- \n Port\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
\n
\n
\n Save\n
\n \n
\n\n
\n\n
\n
DM Logging
\n
With DM (Diagnostic Monitor) Logging tool, you can capture packet exchanges between the modem and cellular network, and also between the modem and the host platform, which then can be used to debug cellular connectivity or performance issues.
\n
\n\n
\n
\n
Download support data
\n
Download diagnostic information about this device for Support to examine. This can take several minutes.
\n
Do this only if requested by Cisco Meraki Support.
\n \n \n
\n
\n
\n
\n
Ethernet configuration
\n
Use this page to configure physical link settings on the Ethernet ports.
\n
\n
\n
\n Save\n
\n \n
\n
\n
\n
\n
Switch ports status
\n
Switch:
\n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Native VLAN Allowed VLANs Flags Status Bytes in Bytes out
\n
\n
\n
\n
Switch ports configuration
\n
Switch:
\n
\n
\n
\n\n
Invalid VLAN number. VLAN must be a value between 1 and 4094, or \"none\" for trunk ports
\n
Invalid Stackport configuration. No more than 2 stackports are supported
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Enabled Stacking Port Schedule Access Policy Native VLAN Allowed VLANs Link Negotiation
\n
\n
\n Save\n
\n or cancel\n \n
\n
\n
\n
\n
\n
\n
\n
Incorrect password
\n
You've entered incorrect login credentials. The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password. The serial number is on the bottom or back of the device.
\n \n
\n Try again\n
\n
\n

\n \n

\n\n \n \n \n \n \n \n \n \n \n\n","version":"1.1","content_length":79963},"tag":[{"name":"jquery","description":"jQuery is a JavaScript library which is a free, open-source software designed to simplify HTML DOM tree traversal and manipulation, as well as event handling, CSS animation, and Ajax.","cpe":["cpe:2.3:a:jquery:jquery:3.5.0:*:*:*:*:*:*:*"],"fullname":"jQuery","category":["JavaScript libraries"],"jquery":{"version":"3.5.0"}},{"spin_js":{"version":""},"name":"spin_js","description":"Configurable JavaScript/CSS spinner that can be used as a resolution-independent loading indicator","fullname":"spin.js","category":["JavaScript graphics"]},{"name":"bootstrap","description":"Bootstrap is a free and open-source CSS framework directed at responsive, mobile-first front-end web development. It contains CSS and JavaScript-based design templates for typography, forms, buttons, navigation, and other interface components.","cpe":["cpe:2.3:a:getbootstrap:bootstrap:*:*:*:*:*:*:*:*"],"bootstrap":{"version":""},"fullname":"Bootstrap","category":["UI frameworks"]},{"name":"modernizr","description":"Modernizr is a JavaScript library that detects the features available in a user's browser.","modernizr":{"version":""},"fullname":"Modernizr","category":["JavaScript libraries"]}],"scan_date":"2026-08-07"},"scan_label":"2026-08-07"},{"highlight":{"whois.related_nets.contacts.emails":"sweetwater@hsihotels.com"},"data":{"ip":"12.16.218.34","isp":"AT&T Services","ntp":{"time_response":{"reference_timestamp":{"seconds":0,"fraction":0},"root_delay":{"seconds":0,"fraction":0},"reference_id":"SU5JVA==","root_dispersion":{"seconds":28,"fraction":10528},"precision":-27,"leap_indicator":3,"receive_timestamp":{"seconds":3347069412,"fraction":2960529275},"poll":0,"version":3,"stratum":0,"mode":4,"origin_timestamp":{"seconds":0,"fraction":0},"transmit_timestamp":{"seconds":3347069412,"fraction":2960785003}},"banner":"Time:\nwall: 689301936\next: 63273677412\nTimeResponse:\nLeapIndicator: 3\nVersion: 3\nMode: 4\nPrecision: -27\nRootDelay:\nRootDispersion:\nSeconds: 28\nFraction: 10528\nReferenceID: [73, 78, 73, 84]\nReferenceTimestamp:\nOriginTimestamp:\nReceiveTimestamp:\nSeconds: 3347069412\nFraction: 2960529275\nTransmitTimestamp:\nSeconds: 3347069412\nFraction: 2960785003\n","time":"2006-01-24T05:30:12.689301936Z","banner_sha256":"ebcae1476248f68362bf485eaaf3a3e4b3142605be20f6211d621884bbb83793"},"uri":"ntp://12.16.218.34:123","host_type":"ip","prot7":"ntp","target":{"ip":"12.16.218.34","type":"ip"},"geo":{"continent":"North America","country":"US","city":"Downers Grove","tz":"America/Chicago","accuracy":500,"location":{"lon":-88.0066,"lat":41.7996},"postal":"60515","registered_country":"US","subdivisions":["Illinois"]},"protocol":"ntp","prot4":"udp","@timestamp":"2026-08-08T13:41:17.941Z","whois":{"abuse":"abuse@att.net","related_nets":[{"country":"US","address":"2600 LAKE COOK RD","city":"RIVRWDS","created":"2015-09-26","description":"IHGCO ATT","handle":"NET-12-16-218-32-1","organization":"IHGCO ATT (IA-425)","start_ip":"12.16.218.32","name":"IHGCO-AT33-218-32","cidr":["12.16.218.32/29"],"net_size":7,"state":"IL","postal_code":"60015","updated":"2015-09-26","end_ip":"12.16.218.39","contacts":{"emails":["sweetwater@hsihotels.com"],"phones":["+1-325-235-3500"]}}],"net":{"country":"US","address":"208 S. Akard St.","city":"Dallas","created":"1983-08-23","description":"AT&T Enterprises, LLC","range":"12.0.0.0 - 12.255.255.255","handle":"NET-12-0-0-0-1","organization":"AT&T Enterprises, LLC (AEL-360)","start_ip":"12.0.0.0","name":"ATT","cidr":["12.0.0.0/8"],"net_size":16777215,"state":"TX","postal_code":"75202","updated":"2025-12-02","end_ip":"12.255.255.255","contacts":{"emails":["abuse@att.net","routing_poc@att.com","rm-ipspecialist@att.com","ipadmin@semail.att.com"],"phones":["+1-919-319-8167","+1-999-999-9999","+1-888-876-2382","+1-888-510-5545"]}},"asn":{"registry":"arin","country":"US","number":["7018"],"name":"ATT-INTERNET4 - AT&T Enterprises","cidr":"12.0.0.0/9","updated":"1983-08-23"}},"port":123,"host":"12.16.218.34","scan_date":"2026-08-07"},"scan_label":"2026-08-07"},{"highlight":{"whois.related_nets.contacts.emails":"sweetwater@hsihotels.com"},"data":{"isp":"AT&T Services","ip":"12.203.183.172","uri":"http://12.203.183.172:80/","host_type":"ip","target":{"ip":"12.203.183.172","type":"ip"},"prot7":"http","geo":{"continent":"North America","country":"US","city":"Okmulgee","tz":"America/Chicago","accuracy":200,"location":{"lon":-95.9665,"lat":35.6305},"postal":"74447","registered_country":"US","subdivisions":["Oklahoma"]},"path":"/","protocol":"http","prot4":"tcp","@timestamp":"2026-08-08T12:06:25.653Z","port":80,"whois":{"abuse":"abuse@att.net","related_nets":[{"country":"US","address":"200 S. Laurel AVE.","city":"MIDDLETOWN","created":"2010-05-04","range":"12.203.183.160 - 12.203.183.175","description":"AT&T Services, Inc.","handle":"NET-12-203-0-0-1","organization":"AT&T Services, Inc. (ATTW)","name":"ATTWORLD25","start_ip":"12.203.183.160","net_size":15,"cidr":["12.203.0.0/16"],"state":"NJ","postal_code":"07748","updated":"2010-05-04","end_ip":"12.203.183.175","contacts":{"emails":["abuse@att.net","rm-ipspecialist@att.com","routing_poc@att.com","swipid@icorefep3.ims.att.com"],"phones":["+1-888-876-2382","+1-999-999-9999","+1-888-613-6330"]}},{"country":"US","address":"101 W MORROW RD","city":"SAND SPRINGS","created":"2018-11-16","description":"IHGCO ATT","handle":"NET-12-203-183-160-1","organization":"IHGCO ATT (IA-1939)","name":"IHGCO-AT54-183-160","start_ip":"12.203.183.160","net_size":15,"cidr":["12.203.183.160/28"],"state":"OK","postal_code":"74063","updated":"2018-11-16","end_ip":"12.203.183.175","contacts":{"emails":["sweetwater@hsihotels.com"],"phones":["+1-325-235-3500"]}}],"net":{"country":"US","address":"208 S. Akard St.","city":"Dallas","created":"1983-08-23","range":"12.0.0.0 - 12.255.255.255","description":"AT&T Enterprises, LLC","handle":"NET-12-0-0-0-1","organization":"AT&T Enterprises, LLC (AEL-360)","name":"ATT","start_ip":"12.0.0.0","net_size":16777215,"cidr":["12.0.0.0/8"],"state":"TX","postal_code":"75202","updated":"2025-12-02","end_ip":"12.255.255.255","contacts":{"emails":["abuse@att.net","routing_poc@att.com","rm-ipspecialist@att.com","ipadmin@semail.att.com"],"phones":["+1-919-319-8167","+1-999-999-9999","+1-888-876-2382","+1-888-510-5545"]}},"asn":{"registry":"arin","number":["7018"],"country":"US","name":"ATT-INTERNET4 - AT&T Enterprises","cidr":"12.128.0.0/9","updated":"1983-08-23"}},"host":"12.203.183.172","http":{"headers":{"accept_ranges":["bytes"],"content_type":["text/html"],"cache_control":["no-store, no-cache, must-revalidate, post-check=0, pre-check=0"],"last_modified":["Thu, 05 Mar 2026 04:52:36 GMT"],"content_length":["108793"],"x_frame_options":["deny"]},"status_code":200,"body_sha256":"d34288ea75e9cd0cc453b81682e43a38bcba4c2a18cc8297b8999078014ad00e","meta":["charset=\"utf-8\"","http-equiv=\"X-UA-Compatible\" content=\"IE=edge,chrome=1\"","name=\"description\" content=\"\"","name=\"viewport\" content=\"width=device-width\""],"body":"\n\n\n\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n

\n \n \n

\n \n

Healthy

This is functioning normally

\n \n

Something's not right

\n This is trying to join a network or find a working uplink connection.\n

\n This does not have a working uplink connection.\n

\n This is unable to reach its configured gateway.\n

\n This has no default gateway configured.\n

\n This has detected an IP conflict on its uplink connection with another machine.\n

\n This is not connected to the Internet.\n

\n This does not have an IP address on its uplink connection.\n

\n This does not have a mesh uplink.\n

\n This does not have a working DNS server.\n

\n This is not connected to the .\n

\n This is not connected to the Internet.
This could be due to poor signal conditions.\n

\n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n

\n Make sure the HTTP proxy configuration is correct.\n

\n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n

\n Make sure you can send outgoing traffic to UDP port 123.\n

\n Device is in Wired WAN Mode! \n

\n \n

Site Survey

This is in site survey mode. You can disable site survey mode on the Configure tab.

Connection
Neighbors
Configure
Uplink
Switch ports status
Switch ports configuration
Cellular Status
SIM PIN configuration
Apps

Your client connection

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Client IP
Client MAC
Client MLD MAC
VLAN
Port
AP radio
Band
Channel
Mode
Max bitrate
Signal	\n \n \n \n

Connection Links

\n \n

Speed test

Run a browser-based speed test to check your connection to this .

Run speed test

details

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n\n \n \n \n \n \n \n\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Name
Network name
Hardware address
Product model
Antenna Beam State
Signal Strength	\n \n \n \n
Reference Signal Received Power (RSRP)	\n \n \n \n
Reference Signal Received Quality (RSRQ)	\n \n \n \n
Received Signal Code Power (RSCP)	\n \n \n \n
Energy per chip over Noise Spectral Density (EC/N0)	\n \n \n \n
Band
Type
Carrier
APN
Status
Cellular Connection
Error Message
IP Type
Platform
Open Source Disclosure	Download
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
Cellular Uplink	\n \n This is connected to a cellular network.\n Cellular IP address: \n Cellular IPv6 address: \n \n
Uplink	\n \n This has a working uplink connection.\n Port status: \n Duplex: \n Speed: \n Port number: \n \n \n This does not have a working uplink connection. \n Check the following: \n \n The uplink cable is in good condition and passes a cable test \n The port on the upstream device is not disabled \n \n \n \n This is acting as a repeater and has not detected an uplink connection on an uplink port.\n \n \n Attempting gateway IP address: \n Attempting gateway IPv6 address: \n This is trying to join a network or find a working uplink connection.\n \n Fixing this first may resolve other issues listed on this page. \n \n
IP Address	\n \n This is directly connected to a local network.\n The IP has been assigned via DHCP.\n A static IP has been configured.\n Primary IP address: \n Subnet mask: \n Primary IPv6 address: \n IPv6 prefix length: \n \n \n This has detected an IP conflict on its uplink connection with another machine.\n The IP has been assigned via DHCP.\n A static IP has been configured.\n Primary IP address: \n Subnet mask: \n Primary IPv6 address: \n IPv6 prefix length: \n \n \n This is acting as a repeater, hence no local IP.\n \n \n This does not have a working IP address. \n Check the following: \n For dynamically assigned IP addresses,\n \n If the traffic should be tagged with a VLAN ID, the VLAN ID should be set in the Configure tab. Otherwise, please confirm that the VLAN ID is empty \n Verify DHCP server or relay is functioning (i.e. has available leases or no errors being printed) \n \n For setting a static IP address, navigate to the Configure tab.\n \n Fixing this first may resolve other issues listed on this page. \n
Gateway	\n \n This has a default gateway and it is reachable.\n Gateway IP address: \n Gateway IPv6 address: \n \n \n This has no default gateway configured. \n Check the following: \n For dynamically assigned IP addresses,\n \n For dynamic IP assignment, the DHCP server is providing the appropriate router IP address for the subnet \n For static IP assignment, the correct router IP is configured \n \n \n \n This has a mesh gateway and it is reachable.\n Mesh gateway IP address: \n Mesh gateway IPv6 address: \n \n \n This has no mesh gateway.\n \n\n \n This is unable to reach the gateway at \n This is unable to reach the gateway at \n The default gateway is not responding to the continuous ARP request from the device. \n Check the following: \n For dynamically assigned IP addresses,\n \n The default gateway is reachable by another device on the same subnet \n The gateway is receiving and responding to the ARP requests from the device \n \n \n Fixing this first may resolve other issues listed on this page. \n
DNS Communication	\n \n This cannot resolve IP addresses through the configured DNS servers. \n Check the following: \n \n The servers can resolve meraki.com, google.com, and yahoo.com \n UDP port 53 traffic to your DNS server is allowed \n \n DNS server 1: \n DNS server 2: \n DNSv6 server 1: \n DNSv6 server 2: \n \n \n This has a working DNS server.\n DNS server 1: \n DNS server 2: \n DNSv6 server 1: \n DNSv6 server 2: \n \n Fixing this first may resolve other issues listed on this page. \n
Internet	\n \n This is connected to the Internet.\n \n \n This is not connected to the Internet.\n \n
System Time	\n \n This cannot reach a NTP server, which can lead to the system clock becoming unsynchronized or showing an incorrect time. \n Check the following: \n \n UDP port 123 to any destination is allowed \n The DNS servers can resolve pool.ntp.org \n \n \n \n Fixing this first may resolve other issues listed on this page. \n
	\n \n This is not connected to the at . \n The needs to establish communication with the Cisco Meraki cloud to download its configuration, monitor, and manage the device.\n \n \n Check the following: \n \n Verify the outgoing traffic to on UDP port number 7351 is allowed upstream \n \n \n \n Check the following: \n \n Verify the outgoing traffic to on TCP port number 443 is allowed upstream \n \n \n \n \n Make sure that the HTTP proxy is reachable and properly configured \n \n \n \n This is not able to reach config-2037.meraki.com or config-s.meraki.com. \n Make sure you can send them outgoing traffic via TCP port 7734 through your firewall. \n \n \n This is successfully connected to the .\n \n \n Last successful config download ago.\n \n \n Last failed attempt to download config ago.\n \n Fixing this first may resolve other issues listed on this page. \n
Firmware	\n \n

Cellular Status

VLAN utilization

\n \n \n \n \n \n \n \n \n \n \n \n

	VLAN list	VLAN count
Port primary or allowed VLANs
Access port voice VLANs
Access policy guest VLANs
Management VLAN
All VLANs in use

Cellular status

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Status
IP
Type
Provider
Model
Access Point Name (APN)
Signal strength
Reference Signal Received Power (RSRP)
Reference Signal Received Quality (RSRQ)
Band

Stacking Status

\n \n \n \n \n \n \n \n \n \n

Hardware Addresss	Product Model	Current

Offline Migration

\n
\n
Meraki peers
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n
Neighbors
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n\n
\n\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n
\n
Internet 1
\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n\n
\n\n
\n
Internet 2
\n\n\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection Type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n
\n\n
\n\n
\n
\n\n
\n
Wired WAN Mode
\n
In Wired WAN Mode Port 1 Is Configured as a WAN Port. This allows the \n Port 1 to be plugged into a switch,router and other uplink to access Meraki Cloud\n even when the cellular network is inaccessible.
\n
\n
Internet 1
\n
- \n Enable Wired WAN Mode\n \n
\n
\n
\n
\n
SIM PIN
\n
\n
- \n PIN\n \n
- \n Number of PIN attempts remaining\n \n
\n
\n
\n
\n
Cellular Information
\n
SIM specific information.
\n
\n
- \n IMEI\n \n
- \n ICCID\n \n
- \n IMSI\n \n
\n
\n
\n
\n
Access Point Name Configuration
\n
Set Cellular Override in order to set APN and other cellular settings.
\n
\n
- \n Cellular Override\n \n
- \n APN\n \n
- \n Username\n \n
- \n Password\n \n
- \n Cellular Authorization\n \n
- \n Cellular IP Type\n \n
- \n PUK\n \n
\n
\n
\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n \n
\n
IP configuration
\n
- \n IP assignment\n \n
- \n VLAN\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
\n
\n
\n
\n
\n
\n\n
\n
\n
Web proxy
\n
HTTP will be used for the device to communicate with the if UDP communication is blocked
\n
- \n Use a proxy?\n \n
- \n IP Address\n \n
- \n Port\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
\n
\n
\n Save\n
\n \n
\n\n
\n\n
\n
DM Logging
\n
With DM (Diagnostic Monitor) Logging tool, you can capture packet exchanges between the modem and cellular network, and also between the modem and the host platform, which then can be used to debug cellular connectivity or performance issues.
\n
\n\n
\n
\n
Migrate to WLC Management mode
\n
Migrate your AP to WLC Management mode
\n
AP will reboot when initiated!
\n \n \n
\n
\n\n
\n
\n
Download support data
\n
Download diagnostic information about this device for Support to examine. This can take several minutes.
\n
Do this only if requested by Cisco Meraki Support.
\n \n \n
\n
\n
\n
\n
Cloud Connectivity Packet Capture
\n
This capture is filtered to traffic pertaining to Meraki Cloud Connectivity.
\n
- \n Switch\n ---\n
- \n Port:\n \n
- \n Duration:\n \n
\n
\n \n \n
\n\n
\n
\n
Ethernet configuration
\n
Use this page to configure physical link settings on the Ethernet ports.
\n
\n
\n
\n Save\n
\n \n
\n
\n
\n
\n
Switch ports status
\n
Switch:
\n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Native VLAN Allowed VLANs Flags Status Bytes in Bytes out
\n
\n
\n
\n
Switch ports configuration
\n
Switch:
\n
\n
\n
\n\n
Invalid VLAN number. VLAN must be a value between 1 and 4094, or \"none\" for trunk ports
\n
Invalid Stackport configuration. No more than 2 stackports are supported
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Enabled Stacking Port Schedule Access Policy Native VLAN Allowed VLANs Link Negotiation
\n
\n
\n Save\n
\n or cancel\n \n
\n
\n
\n
\n
\n
\n
\n
\n\n
\n
\n Enter PIN \n \n \n
\n
\n
\n
\n Enter PUK \n \n Enter new PIN \n \n \n
\n
\n
\n
The PUK may not be attempted on the local status page when fewer than five attempts remain.
\n
Either use the dashboard to try again, or use this SIM in another device.
\n
\n
\n
\n
\n

\n \n

\n\n \n \n \n \n \n \n \n \n \n \n

\n \n

Healthy

This is functioning normally

\n \n

Something's not right

\n This is trying to join a network or find a working ethernet connection.\n

\n This has detected an IP conflict on its uplink connection with another machine.\n

\n This is not connected to the Internet.\n

\n This does not have a working DNS server.\n

\n This is not connected to the .\n

\n This is not connected to the Internet.
This could be due to poor signal conditions.\n

\n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n

\n Device is in Wired WAN Mode! \n

\n \n

Site Survey

This is in site survey mode. You can disable site survey mode on the Configure tab.

Connection
Neighbors
Configure
Ethernet
Switch ports status
Switch ports configuration
Cellular Status
SIM PIN configuration

Your client connection

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Client IP
Client MAC
VLAN
Port
AP radio
Band
Channel
Mode
Max bitrate
Signal	\n \n \n \n

Speed test

Run a browser-based speed test to check your connection to this .

Run speed test

details

Name
Network name
Hardware address
Product model
Signal Strength	\n \n \n \n
Reference Signal Received Power (RSRP)	\n \n \n \n
Reference Signal Received Quality (RSRQ)	\n \n \n \n
Received Signal Code Power (RSCP)	\n \n \n \n
Energy per chip over Noise Spectral Density (EC/N0)	\n \n \n \n
Band
Type
Carrier
APN
Status
Connection
Error Message
IP Type
Platform
Open Source Disclosure	Download
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
Cellular Uplink	\n \n This is connected to a cellular network.\n Cellular IP address: \n Cellular IPv6 address: \n \n
Ethernet	\n \n This is directly connected to a local network.\n Primary IP address: \n Primary IPv6 address: \n \n \n Primary IP address: \n Primary IPv6 address: \n This is acting as a repeater and has not detected a uplink connection on an Ethernet port.\n \n \n This is trying to join a network or find a working Ethernet connection.\n \n \n Primary IP address: \n Primary IPv6 address: \n This has detected an IP conflict on its uplink connection with another machine.\n \n \n
Internet	\n \n This is connected to the Internet.\n \n \n This is not connected to the Internet.\n \n \n This does not have a working DNS server.\n \n
	\n \n This is not connected to the .\n \n \n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n \n \n This is successfully connected to the .\n \n
Firmware	\n \n

Cellular Status

VLAN utilization

\n \n \n \n \n \n \n \n \n \n \n \n

	VLAN list	VLAN count
Port primary or allowed VLANs
Access port voice VLANs
Access policy guest VLANs
Management VLAN
All VLANs in use

Cellular status

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Status
IP
Type
Provider
Model
Access Point Name (APN)
Signal strength
Reference Signal Received Power (RSRP)
Reference Signal Received Quality (RSRQ)
Band

Stacking Status

\n \n \n \n \n \n \n \n \n \n

Hardware Addresss	Product Model	Current

Offline Migration

\n
\n
Meraki peers
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n
Neighbors
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n\n
\n\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n
\n
Internet 1
\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n\n
\n\n
\n
Internet 2
\n\n\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection Type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n
\n\n
\n\n
\n
\n\n
\n
Wired WAN Mode
\n
In Wired WAN Mode Port 1 Is Configured as a WAN Port. This allows the \n Port 1 to be plugged into a switch,router and other uplink to access Meraki Cloud\n even when the cellular network is inaccessible.
\n
\n
Internet 1
\n
- \n Enable Wired WAN Mode\n \n
\n
\n
\n
\n
SIM PIN
\n
\n
- \n PIN\n \n
- \n Number of PIN attempts remaining\n \n
\n
\n
\n
\n
Cellular Information
\n
SIM specific information.
\n
\n
- \n IMEI\n \n
- \n ICCID\n \n
- \n IMSI\n \n
\n
\n
\n
\n
Access Point Name Configuration
\n
Set Cellular Override in order to set APN and other cellular settings.
\n
\n
- \n Cellular Override\n \n
- \n APN\n \n
- \n Username\n \n
- \n Password\n \n
- \n Cellular Authorization\n \n
- \n Cellular IP Type\n \n
- \n PUK\n \n
\n
\n
\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n \n
\n
IP configuration
\n
- \n IP assignment\n \n
- \n VLAN\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
\n
\n\n
\n
Site survey
\n
In site survey mode, the AP will always broadcast the open SSID site_survey-<MAC address> and will not check for connectivity with the .\n This mode should only be used to perform a site survey, not for serving wireless clients.
\n
- \n Survey mode?\n \n
\n
\n
\n
\n\n
\n
\n
Web proxy
\n
HTTP will be used for the device to communicate with the if UDP communication is blocked
\n
- \n Use a proxy?\n \n
- \n IP Address\n \n
- \n Port\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
\n
\n
\n Save\n
\n \n
\n\n
\n\n
\n
DM Logging
\n
With DM (Diagnostic Monitor) Logging tool, you can capture packet exchanges between the modem and cellular network, and also between the modem and the host platform, which then can be used to debug cellular connectivity or performance issues.
\n
\n\n
\n
\n
Switch to Catalyst Mode
\n
Switch your AP's identity to Catalyst Mode
\n
AP will reboot when initiated!
\n \n \n
\n
\n\n
\n
\n
Download support data
\n
Download diagnostic information about this device for Support to examine. This can take several minutes.
\n
Do this only if requested by Cisco Meraki Support.
\n \n \n
\n
\n
\n
\n
Cloud Connectivity Packet Capture
\n
This capture is filtered to traffic pertaining to Meraki Cloud Connectivity.
\n
- \n Switch\n ---\n
- \n Port:\n \n
- \n Duration:\n \n
\n
\n \n \n
\n\n
\n
\n
Ethernet configuration
\n
Use this page to configure physical link settings on the Ethernet ports.
\n
\n
\n
\n Save\n
\n \n
\n
\n
\n
\n
Switch ports status
\n
Switch:
\n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Native VLAN Allowed VLANs Flags Status Bytes in Bytes out
\n
\n
\n
\n
Switch ports configuration
\n
Switch:
\n
\n
\n
\n\n
Invalid VLAN number. VLAN must be a value between 1 and 4094, or \"none\" for trunk ports
\n
Invalid Stackport configuration. No more than 2 stackports are supported
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Enabled Stacking Port Schedule Access Policy Native VLAN Allowed VLANs Link Negotiation
\n
\n
\n Save\n
\n or cancel\n \n
\n
\n
\n
\n
\n
\n
\n
\n\n
\n
\n Enter PIN \n \n \n
\n
\n
\n
\n Enter PUK \n \n Enter new PIN \n \n \n
\n
\n
\n
The PUK may not be attempted on the local status page when fewer than five attempts remain.
\n
Either use the dashboard to try again, or use this SIM in another device.
\n
\n
\n
\n
Incorrect login credentials
\n
You've entered incorrect login credentials. The default username is 'admin' and the password is the serial number (e.g. Qxxx-xxxx-xxxx). The serial number is on the bottom or back of the device.
\n \n
\n Try again\n
\n
\n

\n \n

\n\n \n \n \n \n \n \n \n \n \n\n","title":"","status_line":"200 OK","version":"1.1","content_length":91867},"tag":[{"spin_js":{"version":""},"name":"spin_js","description":"Configurable JavaScript/CSS spinner that can be used as a resolution-independent loading indicator","fullname":"spin.js","category":["JavaScript graphics"]},{"name":"bootstrap","cpe":["cpe:2.3:a:getbootstrap:bootstrap:*:*:*:*:*:*:*:*"],"description":"Bootstrap is a free and open-source CSS framework directed at responsive, mobile-first front-end web development. It contains CSS and JavaScript-based design templates for typography, forms, buttons, navigation, and other interface components.","bootstrap":{"version":""},"fullname":"Bootstrap","category":["UI frameworks"]},{"name":"modernizr","description":"Modernizr is a JavaScript library that detects the features available in a user's browser.","modernizr":{"version":""},"fullname":"Modernizr","category":["JavaScript libraries"]},{"name":"jquery","description":"jQuery is a JavaScript library which is a free, open-source software designed to simplify HTML DOM tree traversal and manipulation, as well as event handling, CSS animation, and Ajax.","cpe":["cpe:2.3:a:jquery:jquery:3.5.0:*:*:*:*:*:*:*"],"fullname":"jQuery","category":["JavaScript libraries"],"jquery":{"version":"3.5.0"}}],"scan_date":"2026-08-07"},"scan_label":"2026-08-07"},{"highlight":{"whois.related_nets.contacts.emails":"sweetwater@hsihotels.com"},"data":{"ip":"12.202.134.83","isp":"AT&T Services","uri":"http://12.202.134.83:80/","host_type":"ip","prot7":"http","target":{"ip":"12.202.134.83","type":"ip"},"geo":{"continent":"North America","country":"US","city":"Augusta","tz":"America/New_York","accuracy":500,"location":{"lon":-82.0111,"lat":33.4734},"postal":"30904","registered_country":"US","subdivisions":["Georgia"]},"path":"/","prot4":"tcp","protocol":"http","@timestamp":"2026-08-08T12:06:15.473Z","whois":{"abuse":"abuse@att.net","related_nets":[{"created":"2010-04-30","organization":"AT&T Services, Inc. (ATTW)","start_ip":"12.202.134.80","name":"ATTWORLD24","range":"12.202.134.80 - 12.202.134.87","cidr":["12.202.0.0/16"],"handle":"NET-12-202-0-0-1","net_size":7,"end_ip":"12.202.134.87","updated":"2010-04-30","contacts":{"emails":["rm-ipspecialist@att.com","routing_poc@att.com","abuse@att.net","swipid@icorefep3.ims.att.com"],"phones":["+1-888-876-2382","+1-999-999-9999","+1-888-613-6330"]}},{"country":"US","address":"1073 STEVENS CREEK RD","city":"AUG","created":"2015-09-24","description":"IHGCO ATT","handle":"NET-12-202-134-80-1","organization":"IHGCO ATT (IA-409)","name":"IHGCO-AT57-134-80","start_ip":"12.202.134.80","cidr":["12.202.134.80/29"],"net_size":7,"state":"GA","postal_code":"30907","end_ip":"12.202.134.87","updated":"2015-09-24","contacts":{"emails":["sweetwater@hsihotels.com"],"phones":["+1-325-235-3500"]}}],"net":{"country":"US","address":"208 S. Akard St.","city":"Dallas","created":"1983-08-23","description":"AT&T Enterprises, LLC","range":"12.0.0.0 - 12.255.255.255","handle":"NET-12-0-0-0-1","organization":"AT&T Enterprises, LLC (AEL-360)","name":"ATT","start_ip":"12.0.0.0","cidr":["12.0.0.0/8"],"net_size":16777215,"state":"TX","postal_code":"75202","end_ip":"12.255.255.255","updated":"2025-12-02","contacts":{"emails":["abuse@att.net","routing_poc@att.com","rm-ipspecialist@att.com","ipadmin@semail.att.com"],"phones":["+1-919-319-8167","+1-999-999-9999","+1-888-876-2382","+1-888-510-5545"]}},"asn":{"country":"US","registry":"arin","number":["7018"],"name":"ATT-INTERNET4 - AT&T Enterprises","cidr":"12.128.0.0/9","updated":"1983-08-23"}},"port":80,"host":"12.202.134.83","http":{"headers":{"accept_ranges":["bytes"],"content_type":["text/html"],"cache_control":["no-store, no-cache, must-revalidate, post-check=0, pre-check=0"],"last_modified":["Thu, 28 Mar 2024 22:16:09 GMT"],"content_length":["79963"],"x_frame_options":["deny"]},"status_code":200,"body_sha256":"14c77a6811451e56f901504e133db9992dced76c59dd2d070f16b428a7d25644","meta":["charset=\"utf-8\"","http-equiv=\"X-UA-Compatible\" content=\"IE=edge,chrome=1\"","name=\"description\" content=\"\"","name=\"viewport\" content=\"width=device-width\""],"title":"","status_line":"200 OK","body":"\n\n\n\n\n \n \n \n \n \n \n \n \n \n \n \n \n \n

\n \n

Healthy

This is functioning normally

\n \n

Something's not right

\n This is trying to join a network or find a working ethernet connection.\n

\n This has detected an IP conflict on its uplink connection with another machine.\n

\n This is not connected to the Internet.\n

\n This does not have a working DNS server.\n

\n This is not connected to the .\n

\n This is not connected to the Internet.
This could be due to poor signal conditions.\n

\n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n

\n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n

\n Device is in Safe Mode! \n

\n \n

Site Survey

This is in site survey mode. You can disable site survey mode on the Configure tab.

Connection
Neighbors
Configure
Ethernet
Switch ports status
Switch ports configuration
Cellular Status

Your client connection

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Client IP
Client MAC
VLAN
Port
AP radio
Band
Channel
Mode
Max bitrate
Signal	\n \n \n \n

Speed test

Run a browser-based speed test to check your connection to this .

Run speed test

details

Name
Network name
Hardware address
Product model
Signal Strength	\n \n \n \n
Reference Signal Received Power (RSRP)	\n \n \n \n
Reference Signal Received Quality (RSRQ)	\n \n \n \n
Received Signal Code Power (RSCP)	\n \n \n \n
Energy per chip over Noise Spectral Density (EC/N0)	\n \n \n \n
Band
Type
Carrier
APN
Status
Connection
Error Message
IP Type
Platform
Open Source Disclosure	Download
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
	\n \n \n \n \n \n \n \n \n
Cellular Uplink	\n \n This is connected to a cellular network.\n Cellular IP address: \n Cellular IPv6 address: \n \n
Ethernet	\n \n This is directly connected to a local network.\n Primary IP address: \n Primary IPv6 address: \n \n \n Primary IP address: \n Primary IPv6 address: \n This is acting as a repeater and has not detected a uplink connection on an Ethernet port.\n \n \n This is trying to join a network or find a working Ethernet connection.\n \n \n Primary IP address: \n Primary IPv6 address: \n This has detected an IP conflict on its uplink connection with another machine.\n \n \n
Internet	\n \n This is connected to the Internet.\n \n \n This is not connected to the Internet.\n \n \n This does not have a working DNS server.\n \n
	\n \n This is not connected to the .\n \n \n Make sure you can send outgoing traffic to UDP port 7351 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 443 through your firewall.\n \n \n Make sure you can send outgoing traffic to TCP port 7734 through your firewall.\n \n \n This is successfully connected to the .\n \n
Firmware	\n \n

Cellular Status

VLAN utilization

\n \n \n \n \n \n \n \n \n \n \n \n

	VLAN list	VLAN count
Port primary or allowed VLANs
Access port voice VLANs
Access policy guest VLANs
Management VLAN
All VLANs in use

Cellular status

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Status
IP
Type
Provider
Model
Access Point Name (APN)
Signal strength
Reference Signal Received Power (RSRP)
Reference Signal Received Quality (RSRQ)
Band

Stacking Status

\n \n \n \n \n \n \n \n \n \n

Hardware Addresss	Product Model	Current

\n
\n
Meraki peers
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n
Neighbors
\n \n \n \n \n \n \n \n \n \n \n \n \n
SSID BSSID Channel Signal (dB) Mode Encryption
\n
\n
\n\n
\n\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n
\n
Internet 1
\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n\n
\n\n
\n
Internet 2
\n\n\n
- \n Role\n \n
- \n Active Port\n \n
- \n VLAN tagging\n \n
- \n VLAN ID\n \n
- \n Connection Type\n \n
- \n IP assignment\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
- \n IPv4 assignment\n \n
- \n IPv4 address\n \n
- \n IPv6 assignment\n \n
- \n IPv6 link-local address\n \n
\n
\n\n
\n\n
\n
\n\n
\n
Safe Mode
\n
In Safe Mode Port 1 Is Configured as a WAN Port. This allows the \n Port 1 to be plugged into a switch,router and other uplink to access Meraki Cloud\n even when the cellular network is inaccessible.
\n
\n
Internet 1
\n
- \n Enable Safe Mode\n \n
\n
\n
\n
\n
SIM PIN
\n
\n
- \n PIN\n \n
- \n Number of PIN attempts remaining\n \n
\n
\n
\n
\n
Cellular Information
\n
SIM specific information.
\n
\n
- \n IMEI\n \n
- \n ICCID\n \n
- \n IMSI\n \n
\n
\n
\n
\n
Access Point Name Configuration
\n
Set Cellular Override in order to set APN and other cellular settings.
\n
\n
- \n Cellular Override\n \n
- \n APN\n \n
- \n Username\n \n
- \n Password\n \n
- \n Cellular Authorization\n \n
- \n Cellular IP Type\n \n
- \n PUK\n \n
\n
\n
\n
\n
Uplink configuration
\n
Configure the uplink Internet connection on this .
\n \n
\n
IP configuration
\n
- \n IP assignment\n \n
- \n VLAN\n \n
- \n Address\n \n
- \n Netmask\n \n
- \n Gateway\n \n
- \n DNS server 1\n \n
- \n DNS server 2\n \n
\n
\n\n
\n
Site survey
\n
In site survey mode, the AP will always broadcast the open SSID site_survey-<MAC address> and will not check for connectivity with the .\n This mode should only be used to perform a site survey, not for serving wireless clients.
\n
- \n Survey mode?\n \n
\n
\n
\n
\n\n
\n
\n
Web proxy
\n
HTTP will be used for the device to communicate with the if UDP communication is blocked
\n
- \n Use a proxy?\n \n
- \n Hostname or IP\n \n
- \n Port\n \n
- \n Authentication\n \n
- \n Username\n \n
- \n Password\n \n
\n
\n
\n Save\n
\n \n
\n\n
\n\n
\n
DM Logging
\n
With DM (Diagnostic Monitor) Logging tool, you can capture packet exchanges between the modem and cellular network, and also between the modem and the host platform, which then can be used to debug cellular connectivity or performance issues.
\n
\n\n
\n
\n
Download support data
\n
Download diagnostic information about this device for Support to examine. This can take several minutes.
\n
Do this only if requested by Cisco Meraki Support.
\n \n \n
\n
\n
\n
\n
Ethernet configuration
\n
Use this page to configure physical link settings on the Ethernet ports.
\n
\n
\n
\n Save\n
\n \n
\n
\n
\n
\n
Switch ports status
\n
Switch:
\n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Native VLAN Allowed VLANs Flags Status Bytes in Bytes out
\n
\n
\n
\n
Switch ports configuration
\n
Switch:
\n
\n
\n
\n\n
Invalid VLAN number. VLAN must be a value between 1 and 4094, or \"none\" for trunk ports
\n
Invalid Stackport configuration. No more than 2 stackports are supported
\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n
Port Enabled Stacking Port Schedule Access Policy Native VLAN Allowed VLANs Link Negotiation
\n
\n
\n Save\n
\n or cancel\n \n
\n
\n
\n
\n
\n
\n
\n
Incorrect password
\n
You've entered incorrect login credentials. The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password. The serial number is on the bottom or back of the device.
\n \n
\n Try again\n
\n
\n

\n \n

\n\n \n \n \n \n \n \n \n \n \n\n","version":"1.1","content_length":79963},"tag":[{"name":"bootstrap","description":"Bootstrap is a free and open-source CSS framework directed at responsive, mobile-first front-end web development. It contains CSS and JavaScript-based design templates for typography, forms, buttons, navigation, and other interface components.","cpe":["cpe:2.3:a:getbootstrap:bootstrap:*:*:*:*:*:*:*:*"],"bootstrap":{"version":""},"fullname":"Bootstrap","category":["UI frameworks"]},{"name":"modernizr","description":"Modernizr is a JavaScript library that detects the features available in a user's browser.","modernizr":{"version":""},"fullname":"Modernizr","category":["JavaScript libraries"]},{"name":"jquery","description":"jQuery is a JavaScript library which is a free, open-source software designed to simplify HTML DOM tree traversal and manipulation, as well as event handling, CSS animation, and Ajax.","cpe":["cpe:2.3:a:jquery:jquery:3.5.0:*:*:*:*:*:*:*"],"fullname":"jQuery","category":["JavaScript libraries"],"jquery":{"version":"3.5.0"}},{"spin_js":{"version":""},"name":"spin_js","description":"Configurable JavaScript/CSS spinner that can be used as a resolution-independent loading indicator","fullname":"spin.js","category":["JavaScript graphics"]}],"scan_date":"2026-08-07"},"scan_label":"2026-08-07"},{"highlight":{"whois.related_nets.contacts.emails":"sweetwater@hsihotels.com"},"data":{"ip":"12.202.134.86","isp":"AT&T Services","uri":"http://12.202.134.86:80/","host_type":"ip","prot7":"http","target":{"ip":"12.202.134.86","type":"ip"},"geo":{"continent":"North America","country":"US","city":"Augusta","tz":"America/New_York","accuracy":500,"location":{"lon":-82.0111,"lat":33.4734},"postal":"30904","registered_country":"US","subdivisions":["Georgia"]},"path":"/","prot4":"tcp","protocol":"http","@timestamp":"2026-08-08T12:05:30.636Z","whois":{"abuse":"abuse@att.net","related_nets":[{"created":"2010-04-30","organization":"AT&T Services, Inc. (ATTW)","start_ip":"12.202.134.80","name":"ATTWORLD24","range":"12.202.134.80 - 12.202.134.87","handle":"NET-12-202-0-0-1","net_size":7,"cidr":["12.202.0.0/16"],"end_ip":"12.202.134.87","updated":"2010-04-30","contacts":{"emails":["rm-ipspecialist@att.com","routing_poc@att.com","abuse@att.net","swipid@icorefep3.ims.att.com"],"phones":["+1-888-876-2382","+1-999-999-9999","+1-888-613-6330"]}},{"country":"US","address":"1073 STEVENS CREEK RD","city":"AUG","created":"2015-09-24","description":"IHGCO ATT","handle":"NET-12-202-134-80-1","organization":"IHGCO ATT (IA-409)","start_ip":"12.202.134.80","name":"IHGCO-AT57-134-80","net_size":7,"cidr":["12.202.134.80/29"],"state":"GA","postal_code":"30907","end_ip":"12.202.134.87","updated":"2015-09-24","contacts":{"emails":["sweetwater@hsihotels.com"],"phones":["+1-325-235-3500"]}}],"net":{"country":"US","address":"208 S. Akard St.","city":"Dallas","created":"1983-08-23","description":"AT&T Enterprises, LLC","range":"12.0.0.0 - 12.255.255.255","handle":"NET-12-0-0-0-1","organization":"AT&T Enterprises, LLC (AEL-360)","start_ip":"12.0.0.0","name":"ATT","net_size":16777215,"cidr":["12.0.0.0/8"],"state":"TX","postal_code":"75202","end_ip":"12.255.255.255","updated":"2025-12-02","contacts":{"emails":["abuse@att.net","routing_poc@att.com","rm-ipspecialist@att.com","ipadmin@semail.att.com"],"phones":["+1-919-319-8167","+1-999-999-9999","+1-888-876-2382","+1-888-510-5545"]}},"asn":{"number":["7018"],"country":"US","registry":"arin","name":"ATT-INTERNET4 - AT&T Enterprises","cidr":"12.128.0.0/9","updated":"1983-08-23"}},"port":80,"host":"12.202.134.86","http":{"headers":{"date":["Sat, 08 Aug 2026 08:01:52 GMT"],"server":["DNVRS-Webs"],"content_type":["text/html"],"connection":["keep-alive"],"etag":["\"0-907-1dd\""],"keep_alive":["timeout=60, max=99"],"last_modified":["Wed, 15 Feb 2017 07:54:31 GMT"],"content_length":["477"]},"status_code":200,"body_sha256":"ac405bd327c53e0c70ab5863d84c99484dbb7b3702663675fc58c5e68a3b7368","favicon":{"hash_sha256":"7d249b2fca8ab8d5ab373444732b8bc9104ab597976640f3441ddfd70148b527","image":"AAABAAEAEBAAAAEAIABoBAAAFgAAACgAAAAQAAAAIAAAAAEAIAAAAAAAQAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAkJCSYJCQksmQkJL/kJCS/5CQkv+QkJL/kJCS/5CQkv+QkJL/kJCS/5CQkv+QkJL/kJCS25CQknIAAAAAkpKUb6Cgov/ExMr/0tLY/9LS2P/S0tj/0tLY/9LS2P/S0tj/0tLY/9LS2P/S0tj/0tLY/8nJzv+np6r/kpKUkJWVlti/v8D/xsbI/8bGyP/CwsT/jo6Q/11dXv8vLy//KCgp/1FRUv+OjpD/wMDC/8bGyP/Gxsj/xcXH/5iYmf+YmJn/x8fI/8fHyP/Dw8T/aGhp/xISEv8HBwf/FxcV/x4eHP8JCQn/CAgI/z09Pf/CwsL/x8fI/8fHyP+goKH/m5ud/8jIyf/IyMn/kJCQ/xEREf8YGBf/R0dG/2BgZf9/fYT/pqaj/1paVf8CAgL/X19g/8jIyf/IyMn/o6Ol/5+fof/Kysv/w8PD/yEgIf8XFxf/NDQ0/ygpLP8SECj/Cwk5/0VEdP+rqLT/b3Fs/wAAAP+jo6T/ysrL/6enqP+ioqT/zMzN/4ODhP8TExP/IiIi/wwNDf8AAAD/AAAm/ywpcP8rKW//JiNp/5eWnP8sLCn/OTk6/8zMzf+pqav/pqao/8/Pz/9ZWVn/Ghoa/xUUE/8mIA7/FxQQ/wAAMP9xbb3/jYnQ/wsLTP9CQWP/UFBK/wUFBf/Pz8//ra2v/6urrf/T09T/XV1d/xsbHv8iHxL/s5tV/0E4H/9wY0L/LSg1/wICPv8AADD/Hx5C/0pKRv8HBwb/09PU/7KytP+vr7H/3t7f/4iIif8nJyv/FhQL/8etXf+mkU7/V04y/y0pF/8AAAD/AAAM/ycmNP80NDP/Kysr/97e3/+3t7n/srK0/+Pj5P/Fxcb/SkpL/wMFBf+WgkT/07Vj/6+WUv9HPSH/BQQA/wUFBf82Njb/FRUU/4qKi//j4+T/u7u8/7a2uP/o6Or/6Ojq/4+Pj/84ODv/AAAA/415Qf+xmFT/SD4i/wYFBf8dHR3/JiYm/ysrK//l5ef/6Ojq/7+/wf+5ubz/7u7w/+7u8P/p6ev/l5eY/z9AQf8JCw7/AAAC/wcHCP8XFxf/Hx8f/0tLTP/f3+D/7u7w/+7u8P/CwsX/vLy/2+vr7f/z8/X/8/P1//Pz9f/ExMb/hYWG/0xMTv8/QUH/aGho/6Ojpf/z8/X/8/P1//Pz9f/y8vT/wMDD/7+/wXLNzc//7u7x//b2+f/29vn/9vb5//b2+f/29vn/9vb5//b2+f/29vn/9vb5//b2+f/x8fT/1NTX/7+/wZAAAAAAwcHDcsHBw9vBwcP/wcHD/8HBw//BwcP/wcHD/8HBw//BwcP/wcHD/8HBw//BwcP/wcHD6sHBw4EAAAAAgAEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAgAEAAA==","path":"/favicon.ico","perceptual_hash":"ffe7c18181c1c37e","ip":"12.202.134.86","host":"12.202.134.86","uri":"http://12.202.134.86:80/favicon.ico","last_modified":["Wed, 15 Feb 2017 07:54:31 GMT"]},"meta":["http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\" ","http-equiv=\"X-UA-Compatible\" content=\"IE=edge\" ","http-equiv=\"Pragma\" content=\"no-cache\" ","http-equiv=\"Cache-Control\" content=\"no-cache, must-revalidate\" ","http-equiv=\"Expires\" content=\"0\" "],"title":"","body":"\r\n\r\n\r\n\t\r\n\t\r\n\t\r\n\t\r\n\t\r\n\t\r\n\r\n\r\n\r\n\r\n","status_line":"200 OK","version":"1.1","content_length":477},"tag":[{"name":"hikvision","description":"","cpe":[""],"fullname":"Hikvision Web Interface","category":["Web cameras"],"hikvision":{"version":""}}],"scan_date":"2026-08-07"},"scan_label":"2026-08-07"}]}

Your client connection

Speed test

details

Cellular status

Stacking Status

Meraki peers

Neighbors

Uplink configuration

Internet 1

Internet 2

Uplink configuration

IP configuration

Site survey

Web proxy

Download support data

Ethernet configuration

Switch ports status

Switch ports configuration

Incorrect password

You've entered incorrect login credentials. The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password. The serial number is on the bottom or back of the device.

Your client connection

Speed test

details

Cellular Status

VLAN utilization

Cellular status

Stacking Status

Meraki peers

Neighbors

Uplink configuration

Internet 1

Internet 2

Safe Mode

Internet 1

SIM PIN

Cellular Information

Access Point Name Configuration

Uplink configuration

IP configuration

Site survey

Web proxy

DM Logging

Download support data

Ethernet configuration

Switch ports status

Switch ports configuration

Incorrect password

You've entered incorrect login credentials. The default login is the serial number (e.g. Qxxx-xxxx-xxxx), with no password. The serial number is on the bottom or back of the device.

Your client connection

Connection Links

Speed test

details

Cellular Status

VLAN utilization

Cellular status

Stacking Status

Offline Migration

Meraki peers

Neighbors

Uplink configuration

Internet 1

Internet 2

Wired WAN Mode

Internet 1

SIM PIN

Cellular Information

Access Point Name Configuration

Uplink configuration

IP configuration

Web proxy

DM Logging

Migrate to WLC Management mode

Download support data

Cloud Connectivity Packet Capture

Ethernet configuration

Switch ports status

Switch ports configuration

The PUK may not be attempted on the local status page when fewer than five attempts remain.

Either use the dashboard to try again, or use this SIM in another device.

Your client connection